Automatic Sleeve Shrink Bottle Labeling Machine for beer cans
electrical heating
steam heating:
Can match with sticker labeling machine
Equipment Synopsis
First, thanks for your attention to "Leadworld" Full Auto Shrinking Label Sleeving Machine. This serial of equipment serves in full auto smart packaging line integrating the functions of delivering bottles, classifying bottles,label sleeving and label shrinking. High speed, precise positioning, saving labor and perfect package are the design tenet of this serial of equipment. It can be applied to the beverage factory and the health food products factory. It is pleasing to the eye and easy to clean and maintain (Take Type LW-BZ for an example, the following is the details of the Type)
Usage and Introduction:
- Machine body:SUS304
- Cutter disc:one group
Adopt eccentric moving mechanism,driven by stepping motor,no bottle no spinning movement,increases the service life and safety, at the same time its cutter uses common paper cutting blade,easy to replace and economy.
- Driven conveying mechanism:one group
It adopts single drive conveying mechanism,it is indispensable secondary heart components to fix center column.No matter the bottle becomes large or small,as long as rotate the hand wheel easily can change the required size,transmission function are finished by gears.
- Synchronous label brush wheel:one group
It follows the design principle of the drive arm block of the driver set,it can adjust the width size by hand wheel according to center column size,it contacts with the center column directly,uses the obsessive way to put the labels directly into the movement bottles.It will not be affected by slight electrostatic,so the speed is fast and accurate.
- Center column:one group
The whole sections of center column design,it guide the label through the cutter,put the labels directly into the movable bottles. Because of its design with driven conveying mechanism,it will not deflected under a long time and high speed, also won't offset center,so it is also the key factor to decide if the label is accurate.
- Work piece Tray:one group
It includes two labels plate,it can alternate in production, rotating use.
- Brush set:one group
It is distributed on both sides of the the conveyor belt.The machine is deviced according to different bottle type requirements,it can assist easily labels to arrive at the fixed point one hundred percent.
- Machine body lifting automatically
It can control the rise and fall automatically through the touch screen,to adapt to the different height of different bottle type.
PLC,light sensor,etc.
Main Parameters:
1.Machine parameters:
Size |
1000L* 860W * 1800H (MM) |
Material and weight |
Stainless steel machine body, 700Kgs |
Cutter disc bottle diameter |
22mm&19mm |
Suitable products |
According to customer's bottle size |
Labels length |
25 mm~300mm,customer made |
Labels thickness |
0.035 mm~0.13mm(PVC ,PET ,OPS) |
Speed |
50pcs/min, 100pcs/min, 200pcs/min, 300pcs/min, 400pcs/min, 500pcs/min |
Conveyor width |
customize |
Film paper core diameter |
12.8-25.4cm |
2. Energy consumption:
Voltage |
3N+PN-50Hz,380V,3 phase |
Power |
3KW |
Optional Fittings List List of LW-BZ standard electric appliance |
Name |
Electric appliance name |
Type |
Quantity |
Manufacturer |
Place of origin |
Lifting unit |
Small power AC Motor |
5IK90GU-CF-5GU30KB |
1 |
TWT |
Taiwan |
Brush lower unit |
Small power AC Motor |
5IK120A-CF |
1 |
TWT |
Taiwan |
|
Frequency transducer |
ATV11HU05M2A |
1 |
schneider |
France |
Feeding unit |
Small power AC Motor |
RV50-15K-180 |
1 |
SANI |
Taiwan |
|
Frequency transducer |
ATV11HU05M2A |
1 |
schneider |
France |
|
Photoelectricity sensor |
CX-421 |
1 |
Panasonic |
Japan |
Bottle unit |
Small power AC Motor |
5IK90GN-SF-5GN15K |
1 |
TWT |
Taiwan |
|
Frequency transducer |
ATV11HU05M2A |
1 |
schneider |
France |
Bottle distribution unit |
Small power AC Motor |
5IK90GN-SF-5GN0.757K |
1 |
TWT |
Taiwan |
|
Frequency transducer |
ATV11HU05M2A |
1 |
schneider |
France |
Brush unit |
Small power AC Motor |
4IK25GN-C-4GN3K |
2 |
TWT |
Taiwan |
Knife disc unit |
Knife disc motor |
BCH0801*1*1C(400W) |
1 |
schneider |
France |
|
Knife disc motor |
LXM23CU04M3X(400W) |
1 |
schneider |
France |
|
Micro Photoelectricity sensor |
PM-L44 |
2 |
Panasonic |
Japan |
Driving unit |
Driving motor |
BCH0801*1*1C(750KW) |
1 |
schneider |
France |
|
Driving motor |
LXM23CU04M3X(750KW) |
1 |
schneider |
France |
Electric eye unit |
High-speed optical fiber sensor |
FX-301 |
1 |
Panasonic |
Japan |
Lighting unit |
Photoelectricity sensor |
CX-442 |
1 |
Panasonic |
Japan |
Conveying unit |
Frequency transducer |
ATV11HU05M0.75A |
1 |
schneider |
France |
|
Motor |
RV50-25K-0.75KW |
1 |
SANI |
Taiwan |
Electric appliance cabinet |
|
PLC |
CP1E-N30DT-A-CF |
1 |
OMRON |
Japan |
|
|
CP1W-16ER |
1 |
OMRON |
Japan |
|
Touch screen |
TPC7062KS |
1 |
WEINVIEW |
Taiwan |
|
Power switch |
MW-220-50-24 |
1 |
Min Wei |
Taiwan |
|
Low-voltage electric appliance |
D20 20A |
1 |
Omron |
Japan |
|
Circuit breaker |
D1810 25A |
2 |
Merlin |
China |
|
Socket |
|
1 |
|
|
|
Relay module |
10A |
2 |
SIEMENS |
|
Certificate
FAQ
Q1:Are you manufacturer or trading company?
We are manufacture verified by ALIBABA and we have our own design team.
Q2:Where are you located? Is it convenient to visit you?
We are located in Shanghai. Traffic is very convenient.
Q3:How can you guarantee quality?
1.We have completed working system and procedures and we follow them
very strictly.
2.Our different worker is responsible for different working process, their work
is confirmed,and will always operate this process, so very experienced.
3.The electrical pneumatic components are from the world famous companies,
such as Germany's Siemens, Japanese Panasonic etc.
4.We will do strict test running after the machine is finished.
5.Our machines are certified by CE,SGS,ISO.
Q4:Can you design the machine according to our requirements?
Yes. We not only can customize the machine according to your technical
drawing, but also can design new machine according to your requirements.
Q5:Can you offer overseas technical support?
Yes. We can send engineer to your company to set the machine and train your
worker if needed.
We can do whole filling line:
Contact person:
Coco
SHANGHAI LEADWORLD MACHINERY TECHNOLOGY CO.,LTD
Mobile :0086-18017922132
Website:shleadworld.en.made-in-china.comshleadworld.en.made-in-china.comshleadworld.en.made-in-china.com